Refresh Your Patio with Power Washing

Is your patio outdated and grimy? The power of power washing patio can instantly transform its appearance to make it look new again. Not only that, but power washing also removes harmful mold and mildew growth in a quick and safe way. With the right pressure washer, you will have no problem achieving a stunning outcome without any effort. Read on as we cover how to properly refresh your patio with power washing!

Begin by removing furniture and other items from your patio

When it comes time to patio power washing, it’s important to take some preparation measures before diving right in. One of the most crucial steps is to clear away any furniture or other items that may be standing in your way. Not only can these objects be damaged or even launched across your yard during the process, they can also hinder the effectiveness of your power wash. So before you turn on that machine, take a few minutes to clear your patio of any potential obstacles. Your furniture (and your patio) will thank you for it!

Prepare the area for power washing by applying a mild cleaning solution on dirt patches and scrubbing it with a brush 

Once your patio is cleared, it’s important to prepare the surface before using the power washer. Start by using a mild cleaning solution on any particularly dirty or stained patches of your patio. This could be a mixture of water and dish soap, or a specialized patio cleaner. Apply the cleaning solution and let it sit for a few minutes before scrubbing the area with a stiff brush. This will help to loosen any stubborn dirt or grime that has built up over time.

Connect the power washer to an appropriate source of water, such as a garden hose 

Now it’s time to connect your power washer to an appropriate source of water. Most pressure washers come with a hose that can be attached to a standard garden hose. Make sure your garden hose is connected to a water supply that can deliver the required amount of gallons per minute (GPM) specified by your pressure washer’s manual. Also, make sure to turn on the water supply before turning on the machine to avoid any damage.

Adjust the pressure settings and begin power washing in sweeping motions from one end of the patio to the other 

Once your power washer is ready to go, it’s important to adjust the pressure settings to the appropriate level for your patio surface. This can vary depending on the type of material your patio is made from, so be sure to consult your pressure washer manual before starting. Once you’ve adjusted the pressure, begin power washing in sweeping motions from one end of the patio to the other. Work in small sections to ensure that you’re covering the surface evenly and not missing any spots. Be sure to overlap each pass slightly to avoid streaks or uneven cleaning.

Rinse off any soap residue with clean water afterwards 

Once you’ve completed power washing the entire patio, it’s time to rinse off any residual cleaning solution or soap. This is important to prevent any damage or staining that may occur if the soap is left to dry on the surface. Simply switch your power washer to a lower pressure setting or use a standard garden hose to rinse off the patio thoroughly. Be sure to take your time and make sure that all the soap is removed before calling it a day.

Let your patio dry completely before putting furniture back in place

After you’ve rinsed off any remaining soap residue, it’s important to allow your patio to air dry completely before putting furniture or any other items back in place. This can take anywhere from a few hours to a full day, depending on the weather and humidity levels in your area. Once it’s dry, take a step back and admire your refreshed patio! You’ll be amazed at how much of a difference power washing can make, and your guests will surely appreciate the updated look and feel of your outdoor space.